Specialized Design: Developed specifically for 90-degree peel testing on structurally complex samples, with a focus on solar panels (PV modules).

Adhesion Assessment: Enables precise evaluation of adhesive conditions between layers during the large-area bonding process of PV modules.

Software Integration: Operates via PC connection using M1F software, providing full control over test parameters, advanced data analysis, and graphical reporting.

Testing Flexibility: While the standard setup is for 90-degree peels, the testing angle can be optionally adjusted to meet various research and industrial standards.

Compact Footprint: Engineered as a bench-top unit to save laboratory space while delivering high stability and repeatable test results.

Capacity: Max. 20 kg.

Stroke: Max. 150 mm.

Testing Speed: 10 ~ 600 mm/min.

Peel Angle: 90° standard (Other angles optionally adjustable).

Operation: Controlled via PC with M1F software accessory.

Dimensions: 50 x 27 x 45 cm.

Versatile Light-Load Testing: Specifically designed for performing 90° and 180° peel strength tests, friction force evaluation, and other micro-tensile tests.

Standalone Operation: Equipped with a built-in 2.8″ touch screen, allowing tests to be performed without external software. It displays real-time data and force curves directly on the unit.

High Precision Sensing: Features a 24-bit force resolution, ensuring highly accurate measurements for materials requiring delicate load detection.

Flexible & Adjustable Design: The load cell position, height, and angle are fully adjustable based on specimen thickness. Supports Wi-Fi data output and optional PC software for advanced reporting.

User-Friendly & Safe: Utilizes a DC motor compatible with universal voltage ranges. Includes safety protections such as over-travel, overload, and timeout shutdown.

Conforming Standards: ASTM D1000, ASTM D3330 (Standard for tape testing).

Maximum Capacity: 200 N.

Stroke: Max. 320 mm.

Testing Speed: 25 ~ 400 mm/min (Digitally adjustable).

Sampling Rate: Max. 50 Hz.

Dimensions: 86 x 34 x 45 cm | Weight: 40 kg.

Non-Contact Sensing Design: Utilizes high-precision non-contact sensors to detect the drop of weights, ensuring minimal interference and increased sensor longevity.

10-Station Testing: Equipped with 10 independent test stations, allowing for simultaneous high-throughput testing and significant time savings for long-term trials.

2.8-inch Touchscreen Interface: Intuitive control panel displays testing times for all stations and automatically records the exact duration until detachment.

Stacking Weight System: Features a versatile stack-type weight design, enabling easy load adjustments starting from a minimum of 150g to suit various tape specifications.

Data Integrity & Connectivity: Built-in Wi-Fi for wireless data management and a backup battery system that ensures uninterrupted testing during temporary power outages.

Impact Protection: Includes high-density foam cushions at weight drop points to absorb impact energy, protecting both the weights and the machine frame.

Conforming Standards: ASTM D3654, JIS Z0237, PSTC 107, GB/T 4851.

Number of Stations: 10 Sets.

Timer Function: Digital display, settable up to 99,999 minutes with automatic average calculation.

Minimum Test Load: 150 g.

Standard Weights: 1,000g (or stackable sets: 150g, 350g, 500g).

Test Plates: Stainless steel, 50 x 75 x 1.5 mm (10 pcs included).

Dimensions: 104 x 26 x 71 cm | Weight: 45 kg (excluding weights).

High-Temperature Testing: Specifically designed to evaluate the shear resistance and holding power of adhesive tapes under high-temperature environments (up to 200°C), simulating real-world conditions in automotive and electronics industries.

10-Station Capacity: Features 10 independent test stations located inside the oven chamber, allowing for simultaneous testing of multiple specimens under identical thermal conditions for better data consistency.

Heat-Resistant Sensors: Equipped with specialized high-temperature sensors that detect the drop of weights. Once the tape fails, the individual timer for that station stops and records the duration automatically.

Uniform Air Circulation: Includes an advanced air circulation system to ensure even heat distribution throughout the chamber, eliminating temperature gradients that could affect test accuracy.

Safety & Observation: Features dual-layer tempered glass for safe visual monitoring and an overheat protection system to prevent equipment damage and ensure lab safety.

Conforming Standards: ASTM D3654, JIS Z0237, PSTC 107, GB/T 4851.

Temperature Range: Ambient +5°C to 200°C.

Number of Stations: 10 Sets.

Timers: 10 independent digital timers, recording up to 99,999 minutes.

Internal Chamber Dimensions: Approx. 60 x 50 x 50 cm.

Material: SUS304 Stainless Steel interior for superior heat and corrosion resistance.

Power Supply: Single Phase 220V, 15A.

Strict PSTC Compliance: Specifically engineered to meet the PSTC-6 (Pressure Sensitive Tape Council) standard for measuring the initial tack of pressure-sensitive adhesive tapes.

Precision Release Mechanism: Features a designated release point on the inclined ramp to ensure consistent initial velocity for every test cycle, eliminating human error from manual releasing.

High-Precision Steel Ball Set: Includes a full set of standard steel balls ranging from No. 1 to No. 32 (1/32″ to 1″ in diameter) to determine the largest ball size held by the adhesive surface.

Industrial-Grade Construction: Built with high-quality, durable materials. The ramp surface is finely finished to provide a smooth, friction-consistent path for the rolling ball.

Easy Data Interpretation: Integrated with a clear measurement scale on the base, allowing operators to quickly and accurately determine the exact stopping distance of the ball.

Conforming Standards: PSTC-6, ASTM D3121, GB/T 4852.

Ramp Angle: 21.5° (In accordance with PSTC specifications).

Steel Ball Sizes: 1/32″ to 1″ (Standard set of 32 balls).

Ramp Run-off Distance: Approx. 6.5 mm (Before contacting the specimen).

Material: Corrosion-resistant coated metal and Stainless Steel.

Dimensions: 30 x 10 x 15 cm | Weight: 1.5 kg.

Precision Specimen Preparation: Specifically designed to cut plastic films, adhesive tapes, or paper into precise parallel strips. Consistent width is critical for obtaining accurate results in Tensile and Peel strength testing.

Parallel Blade System: Features a dual-blade configuration with a fixed distance, ensuring perfectly uniform width throughout the entire length of the specimen, eliminating errors caused by manual ruler-and-cutter methods.

Standardized Widths: Supports industry-standard cutting widths such as 1 inch (25.4 mm) or 15 mm (depending on the specific model) to comply with international standards like ASTM, ISO, and JIS.

Ease of Use & Safety: Built with a stable cutting base and a smooth press mechanism, allowing for rapid preparation of multiple samples without fraying or damaging the specimen edges.

High Durability: Constructed from robust materials with high-grade blades that maintain sharpness over long-term use. The blades are easily replaceable when necessary.

Applicable Materials: Plastic films, adhesive tapes, foils, and thin paper.

Available Cutting Widths (Fixed): * Standard: 1 inch (25.4 mm).

• Optional: 10 mm, 15 mm, 20 mm (to be specified upon order).

Maximum Cutting Length: Approx. 200 – 300 mm.

Blade Type: High-quality hardened steel (Standard replaceable razor blades).

Dimensions: Approx. 40 x 15 x 12 cm | Weight: 4 – 6 kg.