ไทย
Peco Controls was founded in 1955 after developing the first inductive can sensor. In 2015, InspX merged with Peco Controls to form the current company, Peco InspX. Peco InspX is headquartered in Burlingame, California and manufactures all systems and finished components in our facility in Modesto, California.
Applications are available for Metal Containers, Glass Containers, Pouches and Sachets, Pipeline, Fill Level, Vacuum and Pressure. If you need to inspect anything 100% ONLINE, please check with us for the best solution.
SOLO
The Solo is the industry’s top performing, highest speed contactless rigid container inspection solution on the market. The Solo is part of Peco InspX’s family of advanced side-view X-ray inspection systems and is specially designed for the inspection of rigid containers
(e.g. metal and composite cans, plastic containers, glass and boxes).
The Solo mounts over the customer’s existing conveyor and therefore offers completely non-contact inspection at linear speeds up to 700 feet (233 meters) or 2,000 containers per minute.
Architecture: Side-View X-Ray system
X-RAY Tube Configuration: High Contrast X-Ray tube – Single Beam
The aperture size is MAX width: 229 mm (9”), Max height: 300mm (12”)
Line Speed: Up to 700 ft/min (213 m/min)
SOLO PLUS
The Solo Plus is the industry’s top performing, highest speed contactless large rigid container inspection solution on the market. The Solo Plus is part of Peco InspX’s family of advanced side-view X-ray inspection systems and is specially designed for the inspection of large rigid containers (e.g. metal and composite cans, plastic containers, glass and boxes).
The Solo Plus mounts over the customer’s existing conveyor and therefore offers completely non-contact inspection at linear speeds up to 700 feet (233 meters) or 2,000 containers per minute.
Architecture: Side-View X-Ray system
X-RAY Tube Configuration: High Contrast X-Ray tube – Single Beam
The aperture size is MAX width: 300 mm (12”), Max height: 457mm (18”)
Line Speed: Up to 700 ft/min (213 m/min)
TRIO
The Trio is Peco InspX’s high performance rigid package X-ray inspection system, with impressive performance in glass-in-glass identification. The Trio offers very high speed (> 1,000 containers per minute) non-contact container inspection.
The Trio leverages three X-ray beams powered from a single X-ray tube to provide 3 individual “looks” at each container, which allows optimal detection of asymmetric pieces of foreign material such as glass shards.
Customers are encouraged to consult with a Peco InspX sales specialist to determine which machine is best suited for their glass application.
Architecture: Side-View X-Ray system
X-RAY Tube Configuration: High Contrast X-Ray tube – Triple Beam
The aperture size is MAX width: 229 mm (9”), Max height: 300mm (12”)
Line Speed: Up to 650 ft/min (198m/min)
GLISSANDO
The Glissando is Peco InspX’s high performance glass-in-glass X-ray inspection system. The Glissando offers extremely high inspection performance but requires the transfer of containers onto the machine’s internal conveyor. The inspection does not require any gap between containers.
Multiple X-ray tubes create high amplification of foreign material on the bottom of the container.
Customers are encouraged to consult with a Peco InspX sales specialist to determine which inspection machine is best suited for their glass application.
Architecture: Hybrid Side-View X-Ray system
X-RAY Tube Configuration: Two High Contrast X-Ray tubes – Dual Beam
The aperture size is MAX width: 229 mm (9”), Max height: 300mm (12”)
Line Speed: Up to 650 ft/min (198 m/min)
CRESCENDO
The Crescendo is a dual beam side-view X-ray inspection system that is specifically designed for inspecting taller rigid containers (e.g. glass jars, metal and composite cans, plastic containers and boxes) including number 10 cans.
The Crescendo’s two metal ceramic tubes deliver 1200 watts of X-ray power with the secondary X-ray tube being electronically controlled for height adjustment to allow precise inspection of the upper part of a container.
On metal cans, the Crescendo provides a clear image of the top seam. The Crescendo also offers superior fill height measurement capability.
Architecture: Side-View X-Ray system
X-RAY Tube Configuration: Two High Contrast X-Ray tubes – Dual Beam
The aperture size is MAX width: 229 mm (9”), Max height: 300mm (12”)
Line Speed: Up to 700 ft/min (213 m/min)
ALLEGRO
No other top-down X-ray system on the market offers such a robust set of standard features coupled with high performance options typically only available on machines costing thousands more.
The Allegro is also inexpensive and straightforward to maintain. Superior Peco InspX service ensures that you’ll have access to immediate support 24×7 and convenient local service when you need it. And because the Allegro is designed for reliable operation, you’ll be pleased with its low cost of ownership.
Architecture: Top-Down X-Ray system
X-RAY Tube Configuration: High Reliability Integrated X-Ray Generator
The aperture size is MAX width: 508 mm (20”), Max height: 254mm (10”)
Line Speed: Up to 436 ft/min (133 m/min)
ALLEGRO WIDE
No other top-down X-ray system on the market offers such a robust set of standard features coupled with high performance options typically only available on machines costing thousands more.
The Allegro Wide is also inexpensive and straightforward to maintain. Superior Peco InspX service ensures that you’ll have access to immediate support 24×7 and convenient local service when you need it. Because the Allegro Wide is designed for reliable operation, you’ll be pleased with its low cost of ownership.
Architecture: Top-Down X-Ray system
X-RAY Tube Configuration: High Reliability Integrated X-Ray Generator
The aperture size is MAX width: 762 mm (30”), Max height: 254mm (10”)
Line Speed: Up to 436 ft/min (133 m/min)
LARGO
The Largo is designed to handle the largest packages and cases at speeds up to 200 feet (67 meters) per minute.
The Largo features a unique design that utilizes twin X-ray beams for inspection, which allows it to uniformly inspect even the largest of packages.
A wide array of ejection options allows for easy handling of rejected containers.
Architecture: Top-Down X-Ray system
X-RAY Tube Configuration: High Reliability Integrated X-Ray Generator
The aperture size is MAX width: 914 mm (36”), Max height: 432mm (17”)
Line Speed: Up to 436 ft/min (133 m/min)
FERMATA
The Fermata provides a high resolution X-ray inspection for product conveyed through a pipeline. The Fermata includes a variable diameter inspection pipe assembly for accurate and repeatable inspection of product flow. The high resolution X-ray tubes enable the Fermata to identify small pieces of foreign material, such as bone, metal, glass, and rubber.
The compact inspection assembly installs in a short linear space and can be equipped with a remote monitor to enable installation on pipelines well off the production floor.
The standard Fermata configuration includes a 4 inch diameter inspection pipeline assembly (optional 2, 3 and 6 inch configurations) and positive acting two-way discharge valve assembly with mounting.
Architecture: Side-View X-Ray system
X-RAY Tube Configuration: High Contrast X-Ray tube – Single Beam
Pipeline Size: Min Diameter: 2”, Max Diameter: 6”
Throughput Speed: Up to 700 ft/min (230 m/min)
FERMATA TRIO
The Fermata Trio is the most advanced pipeline X-ray inspection system available today.
The Fermata Trio leverages Peco InspX’s triple beam architecture, which in field tests has proven to improve the detection of foreign material by 60% over similar single beam systems.
Architecture: Side-View X-Ray system
X-RAY Tube Configuration: High Contrast X-Ray tube – Triple Beam
Pipeline Size: Min Diameter: 2”, Max Diameter: 6”
Throughput Speed: Up to 700 ft/min (230 m/min)
BRIOSO
The Brioso provides high speed inspection of a continuous web of pouches and packets filled with dry powders and products. Pouches and packets can be made from paper, plastic, metalized film or aluminum foil.
The Brioso leverages Peco InspX’s renowned X-ray inspection architecture to provide the highest level of speed and contaminant detection capability. The compact inspection assembly inspects as the pouches travel vertically and installs in a short linear space with minimum disruption to line operations. The Brioso’s advanced software minimizes false rejects and makes it quick and easy to change the inspection setup for different types of products.
Architecture: Top-Down X-Ray system
X-RAY Tube Configuration: High Reliability Integrated X-Ray Generator
Aperture Size: Min width: 8”, Max Height: 4”
Line Speed: Up to 650 ft/min (198 m/min)
FILLTRAC
The FillTrac Fill Level Inspection System integrates Peco’s 40 year experience in fill level inspection with the latest in technology to provide the best inspection available in a compact, easy to use, and environmentally sound, design.
Architecture: X-Ray or Gamma Based System
X-RAY Tube Configuration: High Contrast X-Ray Tube or Isotope
Aperture Size: No limit on Height, Width: 152.4 mm (6”)
Line Speed: Up to 3,000 containers per minute
VACTRAC
The VacTrac III provides a robust and cost effective way to confirm a minimum standard of vacuum or pressure on a metal closure. The VacTrac uses a inductive, non-contact inspection sensor that has proven to be exceptionally accurate and reliable, inspecting tens of millions of containers without compromise in environments where the closures may have moisture on the surface.
The VacTrac III offers a modern computing platform which delivers an easy to use system interface coupled with powerful online support when you need help. Also, the VacTrac can be purchased with an optional analytics package that provides exceptional insight into the machine’s inspection performance and the production line’s operation.
Architecture: Analog Sensor System
Aperture Size: No limit on Height, Width: 152.4 mm (6”)
Line Speed: Up to 2,000 containers per minute
SAMPLETRAC
The SampleTrac is designed to be an exceptionally reliable and easy to use high-speed sampling system that automatically tracks containers through the filling and seaming process. The system features a linux based software platform running on full computer, which provides exceptional sampling flexibility on the highest speed lines.
Line Speed: Up to 1,500 cans per minute
CONTAINER STOP
Available in normally open or normally closed models. In the normally open (Electro-Arm) configuration, the actuator finds and divides containers with an increasing force which reaches its maximum as containers build up behind the stop when power is applied. The stop returns to the open state when power is taken off. In the normally closed (Auto-Stop) configuration a permanent magnet holds the armature and container in place. On application of power the actuator is withdrawn and the stop opens, allowing containers to flow. The stop returns to the closed state after power is taken off.
