ISRA EN – Unisyntech

Metal sheet decoration is a complex process that places high demands on printing, coating, and material integrity. A whole range of defect sources, such as color deviations, printing defects, contaminations, edge defects, and material defects, can significantly impair the quality of the final product. One of the biggest challenges, however, is to achieve high product quality at a fast production speed.

Our inline printing and coating inspection solutions ensure both 100% quality control and process optimization at maximum throughput.

DecoStar

Reliable quality control for metal printing on steel and aluminum sheets is guaranteed by the DecoStar inline print inspection solution. The flexible system can be used for tinplate or aluminum as well as high-gloss or matte motifs on any type of machine. With highly efficient LED lighting, the system reliably identifies color deviations as well as edge and material defects. In addition, featuring an intuitive multi-touch user interface, the system delivers high-quality defect data that helps eliminate serial defects and reduce waste.

Typical defects

Scratches
Hickeys
Splashes
Streaks
Register defects
Missing print
Color deviations
Print on areas, which should be empty
Ghosting

CoatStar

ISRA PARSYTEC provides solutions for the full range of surface inspection tasks for continuous strip products with a unique and most complete product portfolio. Our goal is to provide advanced solutions along the entire steel production chain. Hundreds of successfully installed systems confirm the benefit of many years of experience and technological competence. Whether it be casting, hot or cold rolling, pickling, annealing, galvanizing, coating or the finishing process – all are covered, as well as end products such as rails.

Typical defects

Scratches
Missing coating
Coating splashes in welding areas

PARSYTEC

ISRA PARSYTEC provides solutions for the full range of surface inspection tasks for continuous strip products with a unique and most complete product portfolio. Our goal is to provide advanced solutions along the entire steel production chain. Hundreds of successfully installed systems confirm the benefit of many years of experience and technological competence. Whether it be casting, hot or cold rolling, pickling, annealing, galvanizing, coating or the finishing process – all are covered, as well as end products such as rails.

Metal sheet decoration is a complex process that places high demands on printing, coating, and material integrity. A whole range of defect sources, such as color deviations, printing defects, contaminations, edge defects, and material defects, can significantly impair the quality of the final product. One of the biggest challenges, however, is to achieve high product quality at a fast production speed.

Our inline printing and coating inspection solutions ensure both 100% quality control and process optimization at maximum throughput.

อ่านเพิ่มเติม

DecoStar

Reliable quality control for metal printing on steel and aluminum sheets is guaranteed by the DecoStar inline print inspection solution. The flexible system can be used for tinplate or aluminum as well as high-gloss or matte motifs on any type of machine. With highly efficient LED lighting, the system reliably identifies color deviations as well as edge and material defects. In addition, featuring an intuitive multi-touch user interface, the system delivers high-quality defect data that helps eliminate serial defects and reduce waste.

Typical defects

Scratches
Hickeys
Splashes
Streaks
Register defects
Missing print
Color deviations
Print on areas, which should be empty
Ghosting

อ่านเพิ่มเติม

CoatStar

In the coating of metal sheets, reproductions due to unsaleable materials, low throughput, and high material waste lead to an increase in production costs. Therefore, only flawless-coated sheets may be processed in the printing press. Already in the raw material processing phase, our CoatSTAR inline inspection system detects defective plates and ensures that they are removed from production. Throughout the production process, CoatSTAR automatically records data on coating quality, plate edges, and weld areas. This data can then be further used either for internal process analyses or as proof of quality for the customer. CoatSTAR meets the highest quality standards and its modularity makes it suitable for any machine.

Typical defects

Scratches
Missing coating
Coating splashes in welding areas

อ่านเพิ่มเติม

PARSYTEC

ISRA PARSYTEC provides solutions for the full range of surface inspection tasks for continuous strip products with a unique and most complete product portfolio. Our goal is to provide advanced solutions along the entire steel production chain. Hundreds of successfully installed systems confirm the benefit of many years of experience and technological competence. Whether it be casting, hot or cold rolling, pickling, annealing, galvanizing, coating or the finishing process – all are covered, as well as end products such as rails.

อ่านเพิ่มเติม

Head Office :
107/69 Moo 6, Khu Khot, Lam Luk Ka District, Pathum Thani 12130

E-mail : [email protected]
Mobile: Office 087-5694478, Sales 086-7888414
Line : @unisyntech
Facebook : Unisyntech Packaging Solution.